The Best Inexpensive Dodge Charger Mod That Increases Horsepower

The aFe 54-10712 Air Intake System Review 

The aFe-10712 Air Intake System is a Magnum FORCE Stage-2 PRO 5R Intake System capable of upgrading your engine’s performance by up to 10 Horsepower and 16 pounds of foot-torque to the wheels.

Manufactured and assembled in America, this product is specifically designed to fit your vehicle and can be installed in approximately 1 hour or less.

This CAI is designed to fit the 5.7-liter and 6.1-liter V-8 engine of the 05-08 Dodge Magnum, 05-09 Chrysler 300C, 08-09 Dodge Challenger and the 06-09 Dodge Charger.

 Why aFe is the Best Intake Charger Mod Money Can Buy?

 The Cold Air Intake works by replacing your stock intake system, increasing air flow by 57 percent. Unlike the stock air intake system, the aftermarket intake pulls cooler air from outside the engine bay supplying your engine with more oxygen.

More oxygen means more combustion allowing your engine’s throttle response to be instantaneous, providing you power when you need it the most.

We found an increase of 1 to 2 miles per gallons. That means, over time, this cold air intake system will pay for itself, which is hard to say about other bolt-on applications that cost twice as much.

This intake system provides a hassle-free installation that utilizes all the factory mounting locations.

aFe 54-10712 Dodge Charger Mod Cold Air IntakeWhat Do We Think?

For our review, we tested this intake on a 2009 Dodge Charger 5.7-liter V-8. From the moment we turned the car over, we were impressed.

The engine definitely sounds more aggressive under load. We revved the car up a few times to hear what the intake sounded like through the rpm band.

It has a much deeper, meaner sound that will have you grinning from ear to ear.

Enough of this fooling around, we want to see what everyone is talking about. Once we got on the road we could feel that the throttle was more responsive.

If you need extra power to pass on the highway or simply wanted to play around from stop light to stop light, this inexpensive bolt-on charger mod will do just that.

After testing the product we noticed a little better fuel economy.

We noticed an increase somewhere between 1 to 2 miles per gallon. It is not a whole lot but does help on those long distance road trips.

What We Like About the aFe 54-10712 Air Intake System:

  • The engine really feels alive, roaring down the road with this intake, you’ll hear every bit of suction.
  • Includes a polyurethane throttle body coupling to fit snug and absorb vibrations.
  • The high-flow air filter is reusable and can be washed saving you money in maintenance.
  • Owners can expect a fuel increase of 1 to 3 miles per gallons.
  • Hassle-free installation that utilized all the factory mounting locations.

What We Did Not Like:

  • The engine is a lot louder that may become annoying on long road trips for some.
  • It is a quick trill leaving you wanting more.
  • If you hammer the throttle constantly, you won’t see any increase in your miles per gallon.
  • Keeping our foot down on the accelerator constantly to hear that throaty sound decreasing our mpgs!

Buy It or Pass On It?

Without a doubt this is the best inexpensive bolt-on charger mod we have used.

We tried various brands. They all were good but the aFe cold air intake was, hands down, the best money can buy.

You can definitely feel and hear the intake sucking in a lot more air. The throttle response was noticed immediately, though wares off quickly.

If you travel to work you will love the fuel you can save using this however if you cannot keep your pedal off the floor board there won’t be any noticeable fuel gains.

The engine definitely sounds like it is ready for the drag strip however after driving a long distance you may find yourself turning the stereo up to drown out the sound.

We highly recommend this product. You will not find a better inexpensive charger mod that give you result like the aFe cold air intake.

Key Features of the aFe 54-10712 Air Intake System:

  • Produces gains of up to 10hp and 16lbs. x ft. torque to the wheels
  • Includes an aFe Pro 5R, 5 layer oiled filter for maximum flow
  • Manufactured and assembled in the USA
  • Dyno tested vs stock / Flow Tested vs stock
  • No cutting or drilling is required; installs in approximately 60 minutes

What Other People Around the Car World Have to Say:

“This Cold Air Intake is fantastic. I purchased it for my 2008 Charger R/T and couldn’t be happier. The tone that it produces and extra torque off the line is great. The directions are clear and simple. This should take no longer than 1 hr to install. All in all, I highly recommend this product.” – B. Verified Amazon Customer

“This CAI is the best for any dodge charger. I have tried 3 different brands. They were “good” but this AFE is the beast. It let the air flows dramatically to the manifolds and you can tell that from the engine roar so beastly. If you want to test how it sounds like? Remove the stock filter and go on WOT and that sound you will hear on 5.7 Daytona is the same u will hear on this amazing filter. It feels like letting 100% of air into your car. LOVE ITTTTTT.“ – Suhaib Farsi. Verified aFe Customer

Where Can I Buy This Inexpensive Bolt-On Charger Mod?

We found the best place on the internet to buy this product is probably Amazon. With their fast shipping and incredible customer service, they are one of the best places to buy from.

Amazon offers other sellers offering the product both new and used, allowing you to get a better price then most retail sites out there.

Click the link below to check out the current price Amazon is offering this product for, as well as all sellers who are selling this product.

Who knows, you could walk away with this product 25 percent cheaper than retail.

Buy from Amazon

Check out the DiabloSport T1000 Trinity Dashboard Tuner and Diagnostic Tool to gain even more horsepower.


Didn't find what you're looking for? Leave a comment below. Let us know how we can serve you better. We'll reply as soon as we can!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.